Wireds: Switch Races
Mon Aug 28, 2017 12:24 am
Wired: Switch Race Difficulty
Greetings! Today i will show the Switch Race wired tutorial. You can find these on random stages in a wired maze and also at game events.
Things you will need:
x2 Wired Trigger: Furni State is changed
x1 Wired Effect: Teleport to furni
x1 Wired Effect: Match Furni to Position & State
x1 Wired Condition: Furni State and Positions Matches
x1 Wired Effect: Move and Rotate
x1 1x1 Furni (will be your moving furni)
x1 Switch
x1 Any floor/seating furni (for teleporting)
First step: Place your wireds like in the picture below.
Click your Wired Trigger: Furni State Is Changed and click the Switch and then select "Ready". Do this for BOTH of your furni state is changed wired.
Next is: click on your Wired Effect: Move and Rotate Furni then click your Moving Furni. It can be any 1x1 Furni but in this tutorial, I used a pumpkin. Then tick the "move horizontally" and "no rotation". Then click "Ready"
If you use the switch, the pumpkin will randomly go forward and backward.
Next is to set up your winning/finish area. This is where you will be teleported at when you get your moving furni to the finish line. Click your Wired Effect: Teleport to Furni and click your winning tile/seat. In this tutorial, I used the blue pura block. Then select "Ready".
Place the moving furni to the starting point of your race. Now click on your Wired Effect: Match Furni to Position & State and click the pumpkin. Put a check on "Current position in room" then select "Ready"
This will make the pumpkin go back to this starting point after getting it to the finish line by using your switch.
Now we gotta set conditions. Use your switch to move the pumpkin onto the finish line.
While the pumpkin is at the finish line, click your Wired Condition: Furni States And Position Match and click on the pumpkin. Put a check on the "current position in room" then select "Ready"
And you're done!
You can still make as many stages as you want! Just repeat the steps!
This tutorial is for only one race!
me getting the pumpkin towards the finish line...
woop! (I got it to the finish line and the pumpkin went back to the starting point!)
got teleported on the pura block!
That's all for this tutorial! Have fun making your wired maze/game rooms!
- AceeliotStaff
- Status :
Online Offline
Posts : 10
Join date : 2017-08-06
Galing galing
Mon Aug 28, 2017 11:43 am
Permissions in this forum:
You cannot reply to topics in this forum
|
|